600V Class Potential Transformer

For low burden applications
such as Auxiliary Powered
Relays, Energy Monitoring
and Control, and other
Electronic Loads.

This family of potential transformers is designed specifically for low burden metering applications. It represents a smaller, lighter and more cost effective alternative to traditional potential transformers. With exception of the accuracy rating, it conforms to the provisions of EEEC57.13 - 1993.

Available options include 69.3V secondary, 50 -60 HZ accuracy ratings, IEC44 - 2 compliance, designs with fuses holders, primary voltages not listed, and with lead wire termination. Consult factory for model numbers and full specifications.

Parameter						Units
Model Number	LV00020	LV00018	LV00021	LV00019	LV00026
Primary Voltage	600	480	277	240	120	Volt
Secondary Voltage	120					Volt
Recommended HV Fuse Size	1/8	1/8	1/4	1/4	1/2	A
Recommended LV Fuse Size	1/2	1/2	1/2	1/2	1/2	A
Insulation Rating	5.0KV BIL 60KV
Insulation Rating	0.6KV BIL 10KV
Insulation Thermal Class	105					°C
Thermal Rating Factor	50 at 30°C, 60HZ					VA
Rated Voltage Factor	1.2 Continuous at 30°C
Accuracy Rating	+/- .3% at burden of 1.0 to 5.0VA, 60HZ, and when HV range=90% to 110% of nominal					%
Transformer Weight	Approximately 4					lbs.

Specifications

PC&S believes in continuous product development and reserves the right to modify and alter the specifications without notice.

Warranty

PC&S, at its sole discretion, agrees to repair, or replace, or refund the purchase price of the products contained herein that are found to be defective in material or workmanship, or do not conform to specifications, if written notice is received by PC&S within 1 year from date of shipment. PC&S assumes no liability, expressed or implied beyond the obligation to repair, replace, or refund the purchase price of the defective material.